Car phone holders in NZ: vent, suction or magnetic?
By MacG TechnoloG · Published
A phone mount is there so you can see maps without holding the phone. In New Zealand the law is specific about that, and the holder also has to fit your car and your phone. Here is how to choose from the options we have in stock.
Overview
Prices are in New Zealand dollars, include GST, and were taken from the live product pages on 11 November 2026. They can change, so check the listing before buying.
What the law actually says
Under clause 7.3A of the Land Transport (Road User) Rule 2004, a driver must not use a mobile phone while driving, including for calls, texts, emails, video messages or similar.
There are limited exceptions. Fully hands-free calling is allowed where the phone does not need to be held or manipulated. Clause 7.3A(7) also allows a call, or a use that is not texting, email or a video message, if the phone is secured in a mounting fixed to the vehicle and any looking or touching is infrequent and brief. That is why a fixed mount matters for navigation. Texting, email and video messages are still not allowed while driving, even in a holder. A queue or a red light is normal traffic flow, not a gap in the rule. This is a summary, not legal advice; read the clause for the precise wording.
Place the holder where it does not block your view of the road or the swept area of the windscreen.
The three common mount types
**Air-vent (gravity or clip).** These clip onto a vent and take little dashboard space. The BOROFONE BH19 Eddie ($7.95) closes on the phone as you drop it in, for one-handed use. It is listed for phones of about 4–6.5 inches, with 360° adjustment, and weighs 37 g. Not every vent works well: thin horizontal slats are the usual fit, while some round or turbine vents are not. A heavy phone in a thick case can also tug at a weak vent.
**Suction, on the windscreen or a smooth dashboard.** These are usually the most stable option, and you can place the phone closer to your line of sight. The BOROFONE BH53 Windy ($9.95) uses a washable suction pad, a one-button clamp 55–90 mm wide, and is listed for phones of about 4.5–6.7 inches, on the dashboard or windscreen. The BOROFONE BH54 Racer ($12.95) adds a long bendable hose so you can bring the screen closer in a van, ute or a car with a deep dash. The BOROFONE BH60 Dainty ($15.95) has a wider 64–95 mm clamp for phones of about 4.5–7 inches, a cable gap at the feet for charging, and a washable pad for the console or windscreen.
Suction needs a clean, smooth surface. Textured or leather-look dashes often will not hold. If a pad feels loose in the heat, clean it and reseat it, or move it onto the glass. Do not leave the arm where it hides a speedo, camera or airbag zone.
**Magnetic, on the console.** The BOROFONE BH103 Cloud ($4.95) is a compact magnetic pad for the centre console, with four N45 magnets rated for a 500 g load and a square iron plate in the box, for phones of about 4.5–7 inches. Mounting the phone is quick, which suits people who hop in and out all day. The plate goes on the phone or inside a case; it can sit in the way of wireless or MagSafe charging, and a strong magnet can confuse the compass in some map apps. Stay within the 500 g rating, especially with a large phone in a heavy case.
Match the holder to the phone and the car
Measure the width of your phone in its everyday case, not the bare handset. A 6.7-inch phone in a thick case can exceed a 55–90 mm clamp, which is why the BH60's 64–95 mm range is useful for larger Android phones and Pro Max-size iPhones. The BH19's 6.5-inch listing is tighter; if your phone is a large one, choose a wider clamp.
A short suction or magnetic base is fine in a small hatch. In a ute, van or 4WD with a tall dash, a long-arm holder such as the BH54 is usually easier to glance at. If several people share the car, a clamp is more forgiving than a magnetic plate stuck to one person's case. Leave a path for a charging cable so the lead is not pulling the phone out of the cradle. Our USB-C car charger guide covers wattage if you also charge on the road.
If you want the holder and the charger together
Two kits put a holder and a charger in one box. The BOROFONE car kit with holder, 30 W charger and USB-C cable is $23.95. It includes the BH54 long-arm holder, the BZ22 Scenery charger (USB-C at 30 W and USB-A at 18 W, or 15 W maximum when both ports are used) and a 1 m USB-C to USB-C cable rated 60 W. That is the straightforward pick for a USB-C iPhone (15 and later) or a USB-C Android phone.
The BOROFONE premium car kit is $34.95. It pairs the same BH54 with the BZ26A Shadow charger (USB-C at 25 W and USB-A at 18 W), a USB-C cable and a 1 m USB-A to Lightning cable, so a USB-C phone and an older Lightning iPhone can charge together.
A simple way to choose
- Small car, phone not huge: the BH19 vent holder at $7.95, or the BH53 suction holder at $9.95 for a firmer mount.
- Van, ute or a deep dashboard: the BH54 at $12.95, or one of the kits if you also need a charger.
- Large phone in a thick case: the BH60 at $15.95; measure the case width first.
- Quick on-and-off for deliveries: the BH103 magnetic holder at $4.95, if you will use the iron plate and stay within 500 g.
Stock and colours can change. All of the holders above were in stock when we checked. Browse the car phone holder and car charger ranges to compare. MacG ships from Auckland by tracked NZ Post to New Zealand and Australia for $9.99, free from $250, with Click & Collect in Auckland at checkout. The Consumer Guarantees Act applies; see returns and warranty.
Shop the range at MacG
Frequently asked questions
Is it legal to use a phone in a holder while driving in New Zealand?
You must not hold the phone, and you must not text, email or view video messages while driving. A phone secured in a mounting fixed to the vehicle may be used for a call, or for a use that is not one of those message types, if any looking or touching is infrequent and brief. Fully hands-free calling is also allowed where you do not have to hold or manipulate the phone. See clause 7.3A for the official wording.
Will a suction holder stay on in summer?
It will if the pad is clean and the surface is smooth glass or a smooth dash. Heat, dust and textured plastic are the usual reasons a pad lets go. Washable pads on the BH53 and BH60 can be cleaned and reseated. If the dash is heavily textured, use the windscreen, and keep the holder out of your line of sight.
Can I use a magnetic holder with a MagSafe iPhone?
The BH103 uses an iron plate supplied in the box, not a MagSafe charging mount. The plate can sit in the way of wireless charging. If you charge with MagSafe at home, use a clamp holder in the car, or fit the plate to a removable case.
What size phone will these holders take?
Check the listing. The BH19 is listed for about 4–6.5 inches, the BH53 and BH54 for about 4.5–6.7 inches with a 55–90 mm clamp, and the BH60 and BH103 for about 4.5–7 inches (the BH60 clamp is 64–95 mm). Measure the phone in its case.
Do I need a car charger as well as a holder?
Only if you want to charge while you drive. A cable gap, as on the BH60, stops the lead lifting the phone out of the clamp. See our USB-C car charger guide for wattage, and our charger and cable guide for wall chargers. ===== END FILE =====