Wired IEM earphones in NZ: TANCHJIM from Bunny to Soda

By MacG TechnoloG · Published

An in-ear monitor (IEM) is a wired earphone built around a fitted ear tip and, usually, a more carefully specified driver than a disposable bud. The point is a better seal and cleaner sound from a phone, a laptop or a small DAC, not a wireless commute gadget. We stock a TANCHJIM range that starts under $40 and goes up to a hybrid flagship. Here is how the models differ, using only the figures on the product pages.

Overview

Prices are in New Zealand dollars, include GST, and were taken from the live product pages on 11 November 2026. They can change, so check the listing before you buy. For everyday wireless buds and over-ear models under $100, see our earbuds and headphones guide. For open-ear and clip-on wireless sets, see the open-ear guide.

What you are buying, and what you need to plug it into

A wired IEM has no battery and no Bluetooth delay. That is ideal for music at a desk, for calls on a mic-equipped cable, and for games where timing matters. The catch is the plug:

  • **3.5 mm** still fits many laptops, older phones, dongles and portable players.
  • **USB-C** suits current iPhones (15 and later), most Android phones and many laptops, with no separate dongle if the set is built that way.
  • **4.4 mm balanced** is a headphone-socket standard on some portable players and DACs, not on a typical phone.

If your phone has no headphone socket and you buy a 3.5 mm IEM, you will need a USB-C or Lightning to 3.5 mm adapter, or a proper USB DAC. Our USB-C and Lightning to 3.5 mm guide covers the simple adapters; a dedicated DAC is a different, more capable device (see Space Pro LT below).

Fit still matters more than the model name. A poor ear-tip seal will make any IEM sound thin. Try the tip sizes in the box, and expect a learning curve if you have only used loose earbuds before.

Entry: Bunny and Bunny Gaming

The TANCHJIM Bunny is $37.95. These are entry Hi-Fi wired IEMs with a dual-chamber DMT4 Ultra dynamic driver, a 3.5 mm plug and an in-line microphone. The listing suggests daily music and podcasts on a 3.5 mm phone, laptop or portable player, and Zoom or phone calls on the inline mic. They are the starting point if you already have a 3.5 mm socket, or a USB DAC with one.

The TANCHJIM Bunny Gaming is $39.95. These are USB-C wired IEMs with an in-line mic and a gaming-tuned dynamic driver, in a translucent black shell with fluorescent-yellow accents. Plug them straight into USB-C on a supported phone, laptop or PC, for party chat, Discord or Teams, and for music. There is no 3.5 mm plug on this version, so they will not fit a socket-only controller or an older laptop without USB-C audio.

Both are a large step up in intent from a $5 wired earphone, at a price that is still easy to try. They are not the same driver design as Fission or Fola, and they do not have the replaceable-plug cable system described on those models.

Mid and up: Fission and Fola

The TANCHJIM Fission is $206.95, in black. These are wired Hi-Fi IEMs with a DMT5 double-chamber dynamic driver and a replaceable-tip cable system (3.5 mm, 4.4 mm or USB-C as supplied). Manufacturer figures on the page: 16 ohm ±10%, 126 dB/Vrms, 8–48 kHz, and THD 0.056% at 1 kHz 94 dB. The replaceable plugs are the practical reason to choose Fission if you want one IEM that can move between a phone (USB-C tip), a 3.5 mm laptop, and a balanced player later, without buying a new cable immediately. The page describes them as a lasting daily IEM for commuting and evening listening.

The TANCHJIM Fola is $305.95. These are wired Hi-Fi IEMs with a DMT5 single dynamic driver, a PU-surround DLC dome, an inner/outer double-magnetic circuit, and interchangeable plug options as supplied. Manufacturer: THD under 0.056% at 1 kHz 94 dB, 16 ohm ±5%, 126 dB/Vrms, 2–48 kHz. The listing describes the tuning as aimed at clarity and control, for focused listening at home and for pairing with a phone, DAP or USB DAC. Fola costs more than Fission; the published electrical figures are similar, with a wider listed frequency range at the bottom (2 Hz vs 8 Hz) and the DLC dome / double-magnetic circuit as the design difference. We will not pretend to have a house "sound signature" review beyond what the pages say.

Flagship: Soda

The TANCHJIM Soda is $473.95. These are flagship hybrid wired IEMs with, per side, a 10 mm dynamic driver, 2 PURE mid balanced-armature drivers, 2 PURE high balanced-armature drivers and 2 SS passive units, on a DMT5 dynamic architecture with a low-distortion waveguide faceplate. Manufacturer: 15.5 ohm ±5%, 120 dB/Vrms, 8–48 kHz. The listing's own reason for this layout is that bass, mids and highs can be handled by drivers suited to each range, which is the usual reason people step up from a single-driver IEM when music is the main hobby. At $473.95, Soda already qualifies for free shipping from MacG (free from $250). It is a specialist purchase, not an everyday commuter bud.

A simple way to choose

  • 3.5 mm phone, laptop or player, and you want a first proper IEM with a mic, for $37.95: the Bunny.
  • USB-C phone or laptop, including game chat: Bunny Gaming at $39.95.
  • One IEM with 3.5 mm, 4.4 mm and USB-C plugs as supplied, and a DMT5 driver: Fission at $206.95.
  • A DMT5 DLC-dome IEM the listing tunes for clarity and control: Fola at $305.95.
  • A multi-driver hybrid as a specialist music purchase: Soda at $473.95.
  • A USB-C dongle with 3.5 mm and 4.4 mm outputs to drive any of the above: Space Pro LT at $189.95.

Stock can change. All of the models above were in stock when we checked. Browse headphones and earphones to compare. MacG ships from Auckland by tracked NZ Post to New Zealand and Australia for $9.99, free from $250, with Click & Collect in Auckland at checkout. The Consumer Guarantees Act applies; see returns and warranty.

Shop the range at MacG

Frequently asked questions

Do I need a DAC for the Bunny?

No. The 3.5 mm Bunny will play from any working headphone socket, and the Bunny Gaming plugs into USB-C on supported devices. A DAC such as the Space Pro LT is optional, and more useful as you move to Fission, Fola or Soda, or if you want a 4.4 mm balanced output.

Will these work with an iPhone 15 or later?

The Bunny Gaming is a USB-C set, so it is the direct fit on a USB-C iPhone, provided the phone accepts USB-C earphones with a mic. The 3.5 mm Bunny needs a USB-C to 3.5 mm adapter or a USB-C DAC. Fission and Fola list USB-C among the interchangeable plugs as supplied; confirm the USB-C tip is in the box if that is your only socket.

Are these wireless?

No. They are wired IEMs (the Space Pro LT is a wired USB-C dongle). If you want wireless, use the earbuds and headphones or open-ear guides.

Is Soda three times better than Fission because of the price?

Not in any way we can honestly measure from a product page. Soda uses a more complex hybrid driver layout, and it costs more. Whether that is worth it depends on how much you listen, what you listen to, and whether you already have a decent source. If you are new to IEMs, Bunny or Fission is the more sensible first step.