Xiaomi Soundbar S22E in NZ: is it right for a small TV?
By MacG TechnoloG · Published
Built-in TV speakers are often the weakest part of an otherwise decent set, especially on a smaller bedroom or apartment screen. A slim soundbar can help dialogue and sport without taking over the room. Here is what the Xiaomi Soundbar 2.0ch S22E specifies, and where a 30 W 2.0 bar is the wrong tool.
Overview
Prices are in New Zealand dollars, include GST, and were taken from the live product pages on 11 November 2026. They can change, so check the listing before you buy.
The short version
The Xiaomi Soundbar 2.0ch S22E is $79.95, in stock when we checked, sold in New Zealand by MacG TechnoloG. Official Xiaomi specs, as given on the product page, list:
- two 45 × 80 mm racetrack full-range drivers
- rated 2 × 12 W, maximum 2 × 15 W (30 W max)
- Bluetooth 5.3, 3.5 mm AUX, optical and S/PDIF inputs
- mains 100–240 V, typical draw 26 W
- frequency range 70 Hz–20 kHz
- size 780 × 64 × 63 mm, 1.5 kg
- wall-mount hole spacing 729 mm
- a matte black mesh grille
In the box: the soundbar, a manual, an S/PDIF cable, screws, expansion tubes, EVA pads and a power cord. Wall-mount fittings are included.
There is no HDMI or HDMI ARC socket on that list, and no subwoofer. This is a 2.0 bar: two full-range drivers, no separate bass unit.
Will it physically fit a small TV?
The bar is 780 mm wide. A typical 32-inch 16:9 TV is only about 710 mm wide, so the S22E will sit slightly wider than the set. Under a 40- or 43-inch TV (roughly 890–960 mm wide) it looks in proportion, and under a 50-inch or larger set it will look small. If you want the bar no wider than a 32-inch screen, this is not the right size.
It is 64 mm high and 63 mm deep, plus whatever clearance you leave for the cable at the back. If the TV sits on a shallow shelf or in a tight cabinet, measure before you buy. For wall mounting, the hole spacing is 729 mm; you will need a solid fixing into the wall, not just plasterboard anchors, and enough space under the TV so the bar does not block the screen or an IR receiver.
At 1.5 kg it is light enough for one person to place on a cabinet. It is a mains-powered unit (100–240 V, typical 26 W), so plan for a power point. That voltage range is fine on a New Zealand 230 V socket with the supplied power cord.
How you actually connect it
Because there is no HDMI ARC, you cannot run a single HDMI cable from the TV's ARC socket and use the TV remote for volume in the usual ARC way. The realistic paths are:
- **Optical / S/PDIF.** Many TVs, even small ones, have an optical audio output. An S/PDIF cable is already in the box. This is the cleanest hook-up for TV sound if the set has the port. You will usually still need the soundbar's own volume control, or a TV setting that fixes the optical output level.
- **3.5 mm AUX.** Useful if the TV, a computer or a projector only has a headphone socket. Dialogue may depend on that socket being set to a sensible level.
- **Bluetooth 5.3.** Handy for music from a phone, or for a device with no spare audio cable. For everyday TV use, a wired optical or AUX link is usually more reliable than Bluetooth (no pairing dropouts, and less delay). If you use Bluetooth for TV, check that the lip-sync is acceptable; some sets allow an audio delay adjustment.
The Xiaomi Smart Projector L1 Pro ($499.95) is a natural partner if you already have that projector, or are considering one: the L1 Pro has Bluetooth and a headphone jack, and our L1 Pro guide covers throw distance and brightness. Confirm the path that works best for your ports before you count on it.
What 30 W and 70 Hz really mean
30 W maximum from two small racetrack drivers is enough to make speech clearer than a thin TV speaker in a bedroom, a studio apartment or a small lounge, at a neighbour-friendly volume. It is not a cinema bar and it will not shake the room.
The listed frequency range starts at 70 Hz. That is enough for voices and most TV themes, but it will not reproduce deep bass the way a 2.1 bar with a subwoofer does. Action films and some music will sound thin at the bottom. If deep bass is the whole point, look for a 2.1 system; we do not currently list a Xiaomi subwoofer or a 2.1 bar to go with this model.
There is also no published Dolby Atmos or virtual-surround claim on the MacG page. Treat it as a straightforward stereo bar.
Who it is for
- A 40- to 50-inch TV, or a projector, in a small or medium room, where clearer dialogue is the aim.
- Renters who want a bar they can pack up, with wall-mount parts in the box if the landlord allows a couple of screw holes.
- People whose TV has optical or 3.5 mm audio, or who are happy to use Bluetooth for music.
It is a weaker fit under a 32-inch TV if you do not want the bar to be wider than the set, in a large open-plan living room, or if you need HDMI ARC, a subwoofer, or surround sound.
Stock can change. The S22E was in stock when we checked. Browse the Bluetooth speakers and soundbars range, or the portable Bluetooth speaker guide if you wanted something for the backyard instead. MacG ships from Auckland by tracked NZ Post to New Zealand and Australia for $9.99, free from $250, with Click & Collect in Auckland at checkout. The Consumer Guarantees Act applies; see returns and warranty.
Shop the range at MacG
Frequently asked questions
Will it work with my TV if I do not have HDMI ARC?
Yes, if the TV has an optical / S/PDIF output (cable included) or a 3.5 mm audio or headphone socket, or if you are willing to use Bluetooth. Check the back of the set before you buy.
Is it wide enough, or too wide, for a 32-inch TV?
The bar is 780 mm wide, which is usually a little wider than a 32-inch 16:9 screen. It sits more comfortably under a 40- or 43-inch TV. Measure your cabinet and the TV width.
Does it come with a subwoofer?
No. It is a 2.0-channel bar. The listed range starts at 70 Hz, so do not expect deep bass.
Can I mount it on the wall?
Yes. Wall-mount fittings (screws, expansion tubes and EVA pads) are in the box, and the hole spacing is 729 mm. Fix it into a solid support, and leave clearance so it does not block the picture or the TV's sensors.
Can I use it with the Xiaomi L1 Pro projector?
The L1 Pro listing describes Bluetooth and a headphone jack, and the S22E accepts Bluetooth, AUX and optical. That combination is a realistic starting point; use the ports you actually have, and see the L1 Pro guide for placement and brightness.